1-Litre-Spray-Ready-Brilliant-Color-Candy-Red-Ink-Lasur-Car-Paint-lackpoint-01-otq

1 Litre Spray-Ready Brilliant Color Candy Red Ink Lasur Car Paint lackpoint

1 Litre Spray-Ready Brilliant Color Candy Red Ink Lasur Car Paint lackpoint

1 Litre Spray-Ready Brilliant Color Candy Red Ink Lasur Car Paint lackpoint
1 Litre Spray-Ready Brilliant Color Candy Red Ink Lasur Car Paint lackpoint. The description of this item has been automatically translated. Labeling requirements according to the CLP regulation. H226 Flammable liquid and vapor. H318 Causes serious eye damage. H315 Causes skin irritation. H335 May cause respiratory irritation. H336 May cause drowsiness and dizziness. H373 May cause damage to organs through prolonged or repeated exposure. Ready-to-spray basecoat ink glaze. Brillant Color Sheet 27. With this color, a background in silver is required. You can find pre-lacquer in our shop. This basecoat must be overcoated with a 2K clear coat. You can find the required clear coat in our shop. Ideally suited for painting vehicles, motorcycles, trucks and much more. This basecoat / car paint is very easy to apply, it dries quickly and has a classy appearance at the end. With this basecoat / car paint you are up to date, which makes you stand out in everyday life and becomes an eye-catcher. As a gift for you 1 mixing cup with scale 1: 1 – 5: 1. 1 color sieve 190my. 1 pair of gloves. Easy to process, low material consumption. We guarantee absolutely new goods. The surface should be grease and rust-free (sanded) to allow good adhesion. Please note the new VOC regulation. From 01 January 2007 the changes from the so-called “VOC regulation” (2004/42 / EC or 1999/13 / EC) take effect. For us as a retailer, this means that we have to ensure that products that are not VOC-compliant, such as industrial coatings, etc. Can only be used for painting industrial objects. These applications are: restoration of oldtimers, filling, aerosol spray cans, painting of vehicles of the Bundeswehr, civil protection, fire brigade, as well as the forces responsible for maintaining order – painting of vehicles that are used in public service exclusively in urban areas, industrial painting e. Plastic parts without vehicle cover. I confirm that I do not meet the relevant VOC limit values corresponding products I of Lackpoint – are used only for the statutory exceptions referring Robert Brown. Sand the surface to be painted with the grit P500 random sander or P1000 to 1200 wet sandpaper and then degrease well (silicone remover). When working on new or unpainted plastic surfaces, apply a plastic primer and note the drying time. Then apply the filler or a primer (1.7 or 1.8mm nozzle size). Processing temperature at least 20 ° C. Sand the surface well with the appropriate grit from the wet sandpaper or smooth. Then clean with silicone remover, the surface must be free of dust (recommended dust cloth) and grease. Before the color is processed, the color tone must be checked (make spray samples). Subsequent complaints are not possible. No claim for compensation! The 2K or basecoats should be processed with a 1.3 or 1.4 mm nozzle size with 2-3 spray passes and even pressure. The temperature should be at least 20 ° C. The 2K colors are approx. Dry after 20-30 minutes. After 2 days is the 2K paint. And fully cured after 4 days. If you are not satisfied with the gloss level or want to protect the paint, you can apply a 2K clear coat if you want. For basic colors (ready to spray metallic or UNI) after approx. 20-30 minutes flash-off time (paint dulls) with a 2K clear varnish. Of course, you can also get everything for the preparation and post-processing for painting work and other great offers in our shop. Looking for something and can not find it? For questions we are available Monday to Friday 8:00 a. To 8:00 p. For each paint order, our customers receive a 3-piece starter set free of charge consisting of. A mixing beaker with mixing ratio scale. A pair of paint gloves. After 2 hours at the latest. Please refrain from requesting bank details from us! Some non-binding processing instructions. This creates rust protection and a filler structure at the same time. As a rule, these primers or fillers are gray. But that doesn’t always fit. For example, you should use a white filler for red top coats so that the red tone gets a higher brilliance. Likewise, light-colored basecoats or varnishes with a high proportion of pearls often have a low opacity. A primer or the epoxy filler in the subsequent color is required there. Likewise, almost every new car is already pretreated on the line with a colored filler, which is cheaper even with small impacts, since the lower layer in the upper layer of paint is the same color. Likewise, a filler in the body color reduces the amount of top coat required because it covers faster. This wafer-thin hood resembling a folding garage is pulled over the vehicle and the section to be painted is cut out and taped. So the entire vehicle is quickly taped and protected from spray mist. Plastics that have already been painted can easily be painted after roughening. If the existing paint layer has been sanded off or the plastic is raw, an adhesive bridge must be sprayed. If the plastic is exposed to vibrations, the paint can tear. In this case 20-30% plasticizer can be added to the last layer of paint. Blending is also known as “spot repair”. Prime the area to be painted over a small area and fillers. Adjacent clearcoat areas are finely sanded. Paint the basecoat in thin layers from the inside out so that the paint mist does not settle on the surface. Only apply basecoat from the outside to the inside during the last spray coat. Now the clear coat is sprayed over the painted area. Then add 50% thinner to the clear coat and spray the transition area. Finally, inject pure thinning over the entire area and the transition. Plain paints in matt. All uni-lacquers (single-layer 2-component lacquers) are high-gloss. These are usually mixed 2: 1 with hardener + 15% thinner. You can also get all of these 2K plain paints here in MATT. This new trend usually has to be mixed 4: 1 with hardener + 50% thinner. The price usually stays the same. Vehicle paints, vehicle preparation, VOC-compliant car paints, vehicle polishes, 2-component paints, metallic paint, pearl paint, grinding wheels, occupational safety, spray cans, RAL colors, RAL, foil erasers, paint stands, plastic repairs, glass fiber mats, polyester universal spatulas, polyester repair resin, metallic polyester filling putty, 9-hole grinding wheels, 6-hole grinding wheels Sanding grid, filler, hardener, cleaning paper, masking paper, adhesive tape, fabric tape, thinner, clear varnish, effect varnish, sanding block, mixing cup, sanding flowers, abrasive fleece, matting gel, pre-cleaner, adhesive cleaner, rim cleaner, press sponge, carpet cleaner, polishing cloth, control powder, anti-dust cloth, underbody care, underbody care Brilliant clear coat, clear coat. As a gift for you 1 mixing cup with scale 1: 1 – 5: 1 1 color sieve 190my 1 pair of gloves We guarantee absolutely new goods. VOC regulation Please note the new VOC regulation processing No claim for compensation! Brillant Color Blatt 27. The item “1 Litre Spray-Ready Brilliant Color Candy Red Ink Lasur Car Paint lackpoint” is in sale since Monday, June 17, 2019. This item is in the category “Vehicle Parts & Accessories\Garage Equipment & Tools\Paints & Supplies\Single-Coat Paint”. The seller is “lackpoint” and is located in Dresden. This item can be shipped to all countries in Europe.
  • Unit Type: Solvent-based Base Coat
  • Colour Code: Brilliant Colour Sheets 27
  • Brand: Lackpoint
  • Manufacturer Part Number: Does Not Apply
  • Measuring Unit: 100 ml
  • Area Of Application: Varnishing & Restoring
  • Unit Quantity: 10,0
  • Colour: Red
  • Paint Type: Acrylic Paint
  • Quantity of paint: 1 Litre

1 Litre Spray-Ready Brilliant Color Candy Red Ink Lasur Car Paint lackpoint

Comments are closed.